RADWAG WPT/P 60 Postal Scales for Packages - Manual (Page 36)

• The process of start mass adjustment can be terminated by pressing
, which is signalled on the display:
• Return to weighing performing the procedure of saving parameters.
Caution:
If the start mass adjustment lasts longer than 15 the <Err8> message will
be displayed and short audible signal will be emitted. Press to perform
calibration again with more stable ambient conditions!
16. COOPERATION WITH PRINTER
Each time the key is pressed a current mass value together with mass
units is sent to RS 232 interface. One of thermal printer in KAFKA series
can cooperate with each platform scales:
a) KAFKA
Only result of weighing with mass unit can be printed.
b) KAFKA 1/Z
This printer is equipped with an internal real time clock.
Both date and time can be printed.
c) KAFKA SQ S
This printer is equipped with an internal real time clock and
possibility of running statistics from measurements. Statistic
contents: quantity of samples, sum of masses of all samples,
average value, standard deviation, variation factor, min value,
max value, difference max - min.
- 36 -