Backlight for supplying from batteries, “beep” signal – after pressing a key, Beep” signal – after pressing a key – RADWAG WPT/P 60 Postal Scales for Packages User Manual
Page 28
Advertising
14.1.2. Backlight for supplying from batteries
The user can change the intensity of backlight from 0% to 100%.
The lower the intensity is the longer the scale operates without recharging
or exchanging batteries. When the intensity is set this function works as
AUTO (described above).
Procedure:
• Enter the submenu <P5.othr> and then:
Return to weighing:
See 10.2.2.
Notice:
The more intense the backlight is the shorter the scale operates
on batteries.
14.2. “Beep” signal – after pressing a key
Procedure:
• Enter the submenu <P5.othr> and then:
- 28 -
Advertising
This manual is related to the following products: