RADWAG WPT/P 60 Postal Scales for Packages - Manual (Page 35)

• Return to weighing performing the procedure of saving parameters.
Caution:
If the calibration process (span adjustment) lasts longer than 15 the
<Err8> message will be displayed and short audible signal will be
emitted. Press to perform calibration again with more stable
ambient conditions!
15.2. Start mass adjustment
If the scale does not require the full calibration process sit is possible
to adjust only a new start mass.
Procedure:
• Enter the submenu <P6.CAL> and then:
• The display will show the following information:
• After the completion of the start mass adjustment the following
screen will appear:
- 35 -