RADWAG WPT/P 60 Postal Scales for Packages - Manual (Page 6)

The device connected to mains inteligently monitors the battery state and
charges it if possible. After sudden lack of power supply from the mains
the device automatically switches to accumulator without breaking
operation.
In case of an elongated storage period in low
temperatures, it is not allowed the full discharge
of the accompanied batteries.
The equipment including accumulators does not belong
to your regular household waste. The European legislation
requires that electric and electronic equipment be collected
and disposed separately from other communal waste with
the aim of being recycled.
Notice:
Some symbols on accumulators identify harmful elements/compounds:
Pb = lead,
Cd = cadmium,
Hg = mercury.
2.2.1. Power supply of weighing indicators in plastic casings
Indicators in plastic casing are intended to be supplied from a power
adapter or from NiMH rechargeable battery pack (standard equipment).
New rechargeable batteries should be formatted according to the
description in the chapter 14.4.4. of this manual.
Alternatively, you can use to power the device R6 size standard non-
rechargible batteries. If you want to use normal batteries instead of
rechargeable ones, proceed as follows:
• Before installing non-rechargeable batteries turn on the device
and set <5.5.CHr6> to <no>, to switch off charging.
• Then install the batteries.
- 6 -
Installing batteries without changing <5.5.CHr6> to <no>
may cause damage of batteries and the indicator.