Advanced Technology International USA M200 - Manual (Page 16)

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094
Email: [email protected] | Web: http://www.tekvend.com
Copicode Alpha Copier / Printer Controller
Product Overview
The Copicode Alpha Copier / Printer Controller is a fully alphanumeric keypad
controller designed to vend images against accounting quotas associated with users,
departments and projects.
The Alpha comes standard with approximately 1500 codes, but can be easily
expanded in multiples of 1500 codes, up to a maximum of 6000 codes.
The device supports two and a half levels of accounting [with the optional P200N
printer], or three levels of accounting [with Copy-Track
® software, using segmented
user codes].
The Alpha supports individual prices for up to four different image types, depending
on copier / printer make and model. The Alpha stores 10 different quotas for limiting
imaging activity by user or project.
The Alpha can be configured for different keypad operation modes. Specifically, it
can be set up for open accounting third party (client / matter) billing, a mode
favored by the legal profession.
The Alpha has four speed buttons and four navigational arrows for quick and easy
administrative programming. When used with Copy-Track software, four sets of
prices are supported across a group of copiers.
With Copy-Track software, usage statistics can be downloaded, and codes uploaded,
manually or serially, using either a laptop or similar device, or a network connection.
The Alpha comes standard with its own 24 VDC power supply, but it can run off
power from the copier / printer in many cases. It is shipped with a copier / printer
specific sprig at no extra charge.
The Alpha has a small footprint, measuring only 4" x 2.5" x 7", and weighs a mere 1
lb. It comes with a one year (from date of shipment) warranty for manufacturing
defects.
Warranty
The Copicode Alpha is warrantied against manufacturing defects for a period of one
year from date of shipment, to be determined by the serial number on its back and
an internal serial number.
Advanced Technologies (TekVend) agrees to repair or replace an Alpha shown to
have manufacturing defects within its warranty period. Advanced Technologies
(TekVend) agrees to pay ground return shipping and insurance on these warranty
repairs or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair. Installer
is expected to use the original copier specific harness (sprig) supplied by Advanced
Technologies (TekVend), and install the Copicode Alpha on the originally specified
copier, unless otherwise authorized.