Advanced Technology International USA M200 - Manual (Page 5)

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Warranty
The M6500 is warrantied against manufacturing defects for a period of two years
from date of shipment, to be determined by the serial number on its main board's
microchip. Warranties for components of the M6500, if different, supercede this
general warranty.
Specifically, the standard MDB changer is warrantied against manufacturing
defects for a period of two years from date of manufacture, to be determined from
the first four digits of its serial number (wwyy).
Additionally, the optional MDB changer is warrantied against manufacturing
defects for a period of three years from date of manufacture, to be determined
from the first four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of three
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any
of the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that
occurs to product returned to it due to inadequate return shipment procedures.
The shipper is responsible for ensuring that return shipment packaging is
adequate and that the return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage
caused by abusive use, vandalism, improper installation, and improper field
repair. Installer is expected to use the original copier specific harness (sprig)
supplied by Advanced Technologies (TekVend), and install the M6500 on the
originally specified copier, unless otherwise authorized.