Chapter 3 configuration, 1 configuration settings, 1 turning the system on for the first time – Advantech DNS-3200 User Manual
Page 42: Chapter, 3 configuration, Configuration settings, Turning the system on for the first time
DNS-3200 User’s Manual
24
Chapter 3 Configuration
3.1 Configuration Settings
Before starting DNS-3200 for the first time, it is necessary to have the
system undergo Initialization Setup, which includes setting the title, area,
language of the computer, manager’s password, network configuration as
well as activation of the system. After this, the user may proceed to use
DNS-3200. This section contains information on Initial Setup.
3.1.1 Turning the system on for the first time
1.
When turning the system on for the first time, it will enter into the
Initialization Setup screen (as shown below) and by pressing Next,
Initialization Setup starts.
Note:
Before turning the computer on for the first time,
be sure the hardware has been properly installed
and the network wires and power cord are con-
nected properly.