Advantech DNS-3200 - Manual (Page 72)

DNS-3200 User’s Manual 54
To initialize disks from the BIOS:
1.
Turn on your computer to start booting.
2. When prompted, type <CTRL-R> to access the RAID BIOS Array
Configuration Utility. The RAID Array Configuration menu is
displayed (see “Color Codes for the BIOS Array Config Utility” in
5.2.
3. Use the arrow keys to select Initialize Disk(s) from the Main
menu.
4. Press Enter.
5. Use the arrow keys to highlight a disk, and then press the Insert
key to select the disk or choose all selectable disks by pressing A.
5.4 Creating Arrays from the BIOS
After your disks are initialized, you can create arrays. You can create a
maximum of eight arrays from the BIOS. See “Understanding Arrays” if
you have not yet decided what type of arrays you need.
Note: You can select multiple disks; there is no need to
initialize one disk at a time.