Figure 5.1: create an array – Advantech DNS-3200 User Manual
Page 75
Advertising
57
Chapter 5
7.
The array is marked Ready for use, and the text at the top of Array
Configuration returns to a description of the menu items.
8.
When you are finished creating arrays, resume the boot process:
a. From the Main menu, highlight Continue to Boot.
b. Press Enter. No reboot is required.
Figure 5.1: Create an array
In the example above, a 4-drive RAID5 array has been configured.
Note:
For installations of SuSE Linux, a popup appears
that says, “A new device was found, do you want
to configure it?” If you do not want to see this
popup when you create arrays, you can check
the “Do not notify me” checkbox.
Advertising