Advantech DNS-3200 - Manual (Page 46)

DNS-3200 User’s Manual 28
7. The system will then install networking components. The system is
set for installation of TCP/IP Protocol. IP is set as DHCP. Click
Next to proceed.
8. The system will restart. You will need to key in the new manager
password for log-in.
After the login is completed, the system will automatically have the two
Gigabit cards of the DNS-3200 set to load balancing mode (as shown
below), where DNS-3200 has only one IP for access and the DNS-3200
will automatically assign the network flow onto the 2 network ports.
Besides, it is available with failover function, which means that when one
network port fails, the other one will be switched on automatically, just to
maintain the online communication.