Advantech DNS-3200 - Manual (Page 66)

DNS-3200 User’s Manual 48
To add a distributed spare while transforming an array:
1.
On the Array menu, click Transform.
2. Configure the new array.
3. In the Distributed Spare field, click Enabled.
To remove a distributed spare:
1.
On the Array menu, click Transform.
2. Configure the new array.
3. In the Distributed Spare field, click Disabled.
4.4.3 Using Dedicated Sparing
A dedicated spare is a disk that you assign as an alternate disk for a spe-
cific array. Should a disk fail in that array, the alternate disk is used to
replace the failed disk and the array is rebuilt. A dedicated spare can be
assigned to any redundant array type, and up to four spares can be
assigned to an array.