Figure 5.3: change controller options, Figure 5.3:change controller options – Advantech DNS-3200 User Manual
Page 82
DNS-3200 User’s Manual
64
Figure 5.3: Change controller options
2.
Use the arrow keys to select a boot option.
3.
Do one of the following:
a. If you do not want to boot from an array, highlight Toggle INT13
Installation using the arrow keys, and then press Enter to
change the setting to Disabled. (We recommend disabling INT13
only if you want to boot from another device, and leave the rest
of the options enabled.)
Or
b. To turn off warnings due to critical arrays when booting, high-
light Toggle Pause if Critical, and then press Enter to change
the setting to Disabled.
Or
c. To turn off warnings due to offline arrays when booting, high-
light Toggle Pause if Offline, and then press Enter to change
the setting to Disabled.
Note:
By default, all options are turned on. Broadcom
recommends that you leave them enabled.