Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 100)

94
Actiontec 54 Mbps Wireless DSL Gateway User Manual
95
Appendix B Switching to Static IP on the Computer
12. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Do not include the periods; they are automatically entered.
13. Click OK . The “Internet Protocol ( TCP/IP ) Properties” window disappears.
14 In the “Local Area Connection Properties” window, click OK . The Local Area
Connection Properties window disappears.
15. Click Close in the Local Area Connection Status window. The window disappears.
16. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window.
The computer restarts. It is now set up with a static IP address, allowing the user to
access the Gateway’s Web Configuration Utilities (Advanced Setup, Utilities, etc.).
Windows XP
1. From the desktop, click Start button in the lower left corner.
2. From the menu that appears, select Control Panel.