Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 42)

36
Actiontec 54 Mbps Wireless DSL Gateway User Manual
37
Chapter 5 Configuring Advanced Settings
The “ WAN IP Address” screen appears.
WAN IP Address allows manual set up of the IP address of the Gateway. To do this:
☞
Note: Some DSL providers use PPP o E to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either
DHCP or
static IP address. If unsure which connection is present, check
with Verizon before continuing.
1. Select “ DHCP ” or “ PPP o E ,” depending on the type of connection the ISP uses.
If PPP Auto Connect is being used, click in the appropriate check box.
2. If using PPPoE was selected in step 1, enter the user name and password in the
appropriate text boxes.
3. Select the IP type. If single static IP was selected, enter the IP address in the
“Single Static IP” text .
4. Select the DNS type. If static DNS address was selected, enter the primary DNS
address and, optionally, the secondary DNS address in the appropriate text
boxes.