Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 80)

74
Actiontec 54 Mbps Wireless DSL Gateway User Manual
75
Chapter 9 Troubleshooting
Time out error occurs when entering a URL or IP Address
s
Verify all the computers are working properly.
s
Ensure the
IP settings are correct.
s
Ensure the Gateway is on and connected properly.
s
Verify the Gateway’s settings are the same as the computer by clicking Status in
the “Main Menu” screen.
s
Check the cable/ DSL modem by attempting to connect to the Internet.
Frequently Asked Questions
This section includes a list of questions concerning the Gateway, and answers to
those questions.
General
I have run out of Ethernet ports on my Gateway. How do I add
more computers?
Plugging in an Ethernet hub or switch expands the number of ports on the
Gateway. Run a standard Ethernet cable from the “Uplink” port of the new hub
or switch to an Ethernet port on the Gateway.
Which protocols does the Gateway support?
The internal LAN connections support multiple protocols (e.g. TCP/IP,
NetBEUI, IPX/SPX, and AppleTalk). The External WAN connection supports
only TCP/IP.
Which connection speeds does the Gateway support?
The
LAN connections on the Gateway support 10/100 Mbps. The WAN connec-
tion supports 8 Mbps, because of the physical restrictions placed on broadband
connections. The 802.11g wireless connection supports up to 54 Mbps connec-
tion speeds (depending on signal quality, environmental factors, and physical
distance).