Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 47)

42
Actiontec 54 Mbps Wireless DSL Gateway User Manual
43
Chapter 5 Configuring Advanced Settings
QoS Status
Selecting QoS Status from the “Advanced Setup” screen causes the “ IP QoS Status”
screen to appear. This screen displays the status of QoS upstream and downstream
traffic, and differentiates both streams into high priority and normal priority traffic.
Remote Management/Telnet
Selecting Remote Management in the “Advanced Setup” screen generates the
“Remote Management/Telent” screen. Remote management allows access to the
Gateway through the Internet via another computer, while Telnet allows access to
the Gateway using a computer running a Telnet program. Actiontec recommends
leaving the Remote Management and Telnet Off (the factory default setting). The
Gateway will be vulnerable to other users on the Internet if Remote Management
or Telnet is activated.