Autodesk XW8400 - Manual (Page 21)

15
Connecting Peripherals
Summary
Workflow for Connecting Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connection Diagram for the HP xw8400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting the Keyboard, Mouse, and Monitor Calibration Device . . . . . . . . . 18
Connecting Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Workflow for Connecting Peripherals
You must connect peripherals (monitor, keyboard, mouse, storage, and network) to each Lustre
workstation before you connect the workstations to video I/O, a control surface, or to other
components in the workgroup.
Connect all hardware peripherals before you boot your workstation.
See the following table for a summary of the steps necessary to connect peripherals to your
Lustre workstation.
Step: Refer to:
1. Review the connection diagram for your workstation. “Connection Diagram for the HP
xw8400”
on page 16.
2. Connect a monitor to the workstation. “Connecting the Monitor” on page
17.
3. Connect a keyboard, mouse, and calibration device to
your workstation. “Connecting the Keyboard, Mouse,
and Monitor Calibration Device”
on
page 18.
4. Connect the workstation to storage. “Connecting Storage” on page 18.