Port broadcom adapter, Integrated network adapter – Autodesk XW8400 User Manual
Page 32
Connecting Peripherals
2
26
4-Port Broadcom Adapter
Connect the workstation to your facility’s network to access background rendering nodes, other
Lustre Stations, and the facility’s NAS or SAN centralized storage (if applicable). You connect
the ports on the Broadcom card as follows:
•
Connect Port 0 to the Autodesk control surface hub or the control surface itself.
•
Connect Port 1 to your house network.
•
Connect Port 2 to a SAN private network (optional).
For more details about configuring the Autodesk control surface, see
Integrated Network Adapter
For Windows-based workstations, connect the integrated network port to the Slave Renderer.
For more details about configuring the Slave Renderer, see
“Connecting the Slave Renderer to
For Linux-based workstations, connect the integrated network port to the Incinerator private
port. Refer to the Autodesk Incinerator 2009 Installation and User Guide for information on how
to connect your workstation to the Incinerator private network.