Autodesk XW8400 - Manual (Page 23)

Connecting the Monitor
17
N OTE : The Slave Renderer option is not available for Lustre with Incinerator.
Connecting the Monitor
Connect the monitor to the DVI connection on the Lustre workstation’s graphics card. You can
use the DVI extender cable (DL.CAB-HDTV-FO-82-MM) to extend the cable to a machine
room.
To connect the monitor:
h Use the DVI cable to connect the DVI OUT1 port of the NVIDIA® Quadro® FX5500
graphics card to the DVI-D IN port of the monitor.
N OTE : Although the DVI fiber cable connectors are identical, their functions are different.
Ensure that the connector labeled Send is connected to the Lustre workstation, and that the
connector labeled Receive is connected to the monitor.
HP xw8400 Workstation
(Linux - Incinerator only)
To USB extender for mouse,
keyboard, monitor calibrator
To DVS BOB
0 to control surface,
1 to LAN, 3 to SAN
Ref In from sync gen
To GFX monitor
To InfiniBand
switch
To Incinerator
GigE switch
HD-SDI (V1) Out 4:2:2 to 4:2:2 or 4:4:4
display device or VTR
Ref In from sync gen
HD-SDI (V2) Out
0:2:2/4:0:0 to 4:4:4
display device or VTR
HD-SDI Out (B) to
4:4:4 VTR
(dual link 0:2:2)
HD-SDI In (A) from 4:2:2
VTR (or 4:4:4 dual link)
HD-SDI Out (A) to 4:2:2
VTR (or 4:4:4 dual link)
DVI2 Out to FX5500
SDI daughter card
Connect to second
DVI out on the
main FX5500 card
HD-SDI In (B) from
4:4:4 VTR
(dual link 0:2:2)