Autodesk XW8400 - Manual (Page 22)

Connecting Peripherals 2
16
Connection Diagram for the HP xw8400
The following diagrams show the connections for the HP xw8400 workstation.
N OTE : These diagrams provide an overview of video I/O connections. See “Connecting Video I/O
to a Master or HD Station” on page 36.
N OTE : Systems connected to the high-speed InfiniBand network may experience performance
degradation if high bandwidth is requested on the Broadcom GigE card (slot 7).
5. Connect the workstation to your network. “Network Connections” on page
19.
6. After you connect all the peripherals to your Lustre
workstations, you can connect the workgroup
components together. Chapter 3, “Connecting System
Components,”
on page 27.
Step: Refer to:
HP xw8400 Workstation
To USB extender for mouse,
keyboard, monitor calibrator
HD-SDI (V1) Out 4:2:2 to 4:2:2 or 4:4:4
display device or VTR
Ref In from sync gen
HD-SDI (V2) Out
0:2:2/4:0:0 to 4:4:4
display device or VTR
To DVS BOB
HD-SDI Out (B) to
4:4:4 VTR
(dual link 0:2:2)
0 to control surface,
1 to LAN, 3 to SAN HD-SDI In (A) from 4:2:2
VTR (or 4:4:4 dual link)
HD-SDI Out (A) to 4:2:2
VTR (or 4:4:4 dual link)
Ref In from sync gen
DVI2 Out to FX5500
To Slave Renderer
(Windows Configuration)
SDI daughter card
Connect to second
DVI out on the
main FX5500 card
To GFX monitor
HD-SDI In (B) from
4:4:4 VTR
(dual link 0:2:2)
To storage
1, 4 to SAN; 2, 3 to Stone
To InfiniBand switch
(optional)