Autodesk XW8400 - Manual (Page 9)

Optional Lustre Components
3
Optional Lustre Components
You can expand the features of your Lustre system and improve the efficiency of your workflow
by adding any of the following components.
Control Surface — The Autodesk control surface provides improved interactivity when
colour grading film and video footage. You can perform many of the same tasks you do in the
Lustre user interface using the control surface.
Video I/O — Video I/O is provided by the DVS Centaurus® board, which consists of an HD/
SD board and a breakout box. This configuration provides real-time SDI input and output of
uncompressed 8- or 10-bit HD or SD video in both YUV (4:2:2) and RGB formats (4:4:4 or
4:2:2).
For a list of supported video formats, see the Autodesk Lustre 2009 User Guide.
Audio I/O — Audio I/O is provided by the DVS Centaurus board, which consists of an HD/SD
board and a breakout box, and an ADAT Converter such as the Lucid ADA 88192. This
Station Configuration
Master Station Default — All features are available including SD and HD I/O, dual link and
HSDL video formats and the DI Pack, which consists of infrared channel
dust removal and support for all standard input and output resolutions
and bit-depths. Certain features require add-on licensing.
Add-Ons — The following features can be added to the Default
configuration: the Slave Renderer and up to three panels for the Autodesk
control surface. The Slave Renderer requires a separate license.
Lustre HD Station Default — Includes all features except for the DI Pack (see the Master
Station description). File input is limited to 2K resolution. File output is
limited to HD resolution, 10-bit. Certain features require add-on licensing.
Add-Ons — The following features can be added to the Default
configuration: SD and HD I/O, dual link and HSDL video formats, the Slave
Renderer, and up to three panels for the Autodesk control surface. The
Slave Renderer requires a separate license.
Lustre Station Default — All features are available except for primary and secondary
colour grading. The DI Pack (see the Master Station description) is also
included, along with full dust removal functionality, and the ability to
create geometries and masks.
With Primary Colour Correction — Includes all features of the default
option as well as primary colour grading.
Add-Ons — The following features are available for either the Default
configuration or the With Primary Colour Correction configuration, and
require an additional license: SD and HD I/O, dual link and HSDL video
formats, and up to three panels for the Autodesk control surface.
The Slave Renderer requires a separate license.