Konica Minolta bizhub PRESS C8000e - Manual (Page 111)

bizhub PRESS C8000 4-16
4.4 Adjusting Red, Green, and Blue Colors 4
5
Make an adjustment for red color on the Red Screen.
Press [Red] to display the Red Screen.
Select one from [-1] to [-4] to make the red color weaker than the original.
Select one from [+1] to [+4] to make the red color stronger than the original.
% Select [0] to resume the standard level.
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 8 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] and proceed to step 9.
6
Make an adjustment for green color on the Green Screen.
Press [Green] to display the Green Screen.
Select one from [-1] to [-4] to make the green color weaker than the original.
Select one from [+1] to [+4] to make the green color stronger than the original.
% Select [0] to resume the standard level.
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 8 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] and proceed to step 9.
7
Make an adjustment for blue color on the Blue Screen.
Press [Blue] to display the Blue Screen.
Select one from [-1] to [-4] to make the blue color weaker than the original.
Select one from [+1] to [+4] to make the blue color stronger than the original.
% Select [0] to resume the standard level.
% Press [Default Set] to resume the standard level and return to the Quality Adjustment Screen.
% Proceed to step 8 if a sample copy is desired to check the adjustment result.
% To complete the adjustment, press [OK] and proceed to step 9.