Konica Minolta bizhub PRESS C8000e - Manual (Page 313)

bizhub PRESS C8000 10-5
10.1 Utility Menu Screen Outlines 10
[02 Job Reset Setting]
Specify whether or not to initialize the setting
currently specified when the machine takes it
that the user has changed, or original docu-
ment is loaded into the ADF. And select the
settings to be initialized each time a single job
has been completed. Change User: Yes, No
ADF Original Direction: Reset, Not Reset
Reset Button Function: Initialize, Full Auto
Mode Memory Auto Call: ON, OFF
Finisher Mode when Full Auto: Offset Sort,
Offset Group, Sort, Group, Staple Sort,
Fold & Staple, Half-Fold, Face Up, Face
Down
Initial by Key Counter Insert: ON, OFF
Status Hold When Auto Reset: Not Keep,
Keep
Next Job Staple Setting: Release, Do Not
Release
Original Set/Bind Direction: Release, Do
Not Release
[05 Default Screen Setting]
Select the screen to be displayed when the sub
power switch is turned on or Auto Reset is acti-
vated. MACHINE, JOB LIST/Hold Job, JOB
LIST/Reserved Job *
[06 Set Zoom Ratio Setting]
Modify predefined fixed ratios. Also, preset fre-
quently used magnification ratios. Fixed (Enlarge/Reduce): 8
Set Zoom Ratio (Enlarge/Reduce): 3
[07 Power Save Setting]
Select the period of time that must elapse before
Auto Low Power or Auto Shut OFF is activated.
Also select either Auto Low Power or Auto Shut
OFF to be activated when Power Save is pressed
on the control panel. Auto Low Power: --- min., 5 min., 10 min.,
15 min., 30 min., 60 min., 90 min., 120
min., 240 min.
Auto Shut OFF: --- min., 0 min., 1 min., 30
min., 60 min., 90 min., 120 min., 240 min.
Power Save Function: Auto Low Power,
Auto Shut OFF *
[08 Date/Time Setting]
Set the current date and time, the daylight-saving
time, and the time difference. Setting Time
Daylight Saving Time: OFF, ON (1-150
min.)
Time Zone *
[09 Operation/Info. Sound Setting]
[01 Volume Setting]
Specify whether or not to enable the key oper-
ation sound or information sound and voice
message, and also set the volume when they
are turned on. Operation Sound (Buzzer): ON, OFF
1 (Small) to 8 (Big)
Info. Sound/Voice (Speaker): ON, OFF; 1
(Small) to 10 (Big) *
Menu Item/Description Setting options (with default bolded)