Konica Minolta bizhub PRESS C8000e User Manual
Page 285
Advertising
bizhub PRESS C8000
8-4
8.2
Checking Feature Selections before Printing: Mode Check
8
5
If you want to change the current job settings after checking them, press [Close].
The Copy Screen will be restored.
% If no change is required, proceed to step 8.
6
Navigate to the screen you need, and change the setting as desired.
7
Return to the Copy Screen, then press Mode Check on the control panel.
% Be sure to display the Copy Screen before you access the Mode Check Screen by pressing Mode
Check.
8
If no further change is required, press Start on the control panel.
% You can set the print quantity with the Mode Check Screen displayed.
The machine will start printing.
Advertising