Konica Minolta bizhub PRESS C8000e User Manual
Page 44
bizhub PRESS C8000
3-6
3.2
Original Setting
3
% Without [2->2] or [2->1] selected in step 3, the message [Bind direction is effective only in [2->1][2-
>2]] will be displayed, and the top binding setting will not function.
6
Press [OK] to complete the setting and return to the Copy Screen.
7
Press [Output Setting].
The Output Setting Screen will be displayed.
8
Select [Right & Left] under [Bind Direction].
% [Right & Left] is specified by default. So this setting is not required normally. If [Top] is selected, [Top]
specified in the Original Setting will not function.
9
Press [OK] to complete the setting and return to the Copy Screen.
% Press [Default Set] to restore the initial setting, or press [Cancel] to resume the previous setting.
% Printing will not start without the Copy Screen displayed. Be sure to display the Copy Screen when
you start printing.