3 correcting see-through effects: bleed prevention – Konica Minolta bizhub PRESS C8000e User Manual
Page 107
bizhub PRESS C8000
4-12
4.3
Adjusting Image Density
4
4.3.3
Correcting See-Through Effects: Bleed Prevention
Adjust the density to prevent the see-through effect in scanning double-sided originals.
1
Press [COPY] tab to display the Copy Screen.
2
Press [Quality Adj.] on the Copy Screen.
3
Position the original.
% Prepare an original for adjusting Bleed Prevention, and position it into the ADF or on the original
glass.
4
Make an adjustment for Bleed Prevention on the Quality Adjustment Screen.
Use [-] and [+] on the right side of [Bleed Prevention] to specify the desired adjustment level. Specified
adjustment level should not only prevent the see-through effect but not affect the copy image.
% Proceed to step 5 to make the adjustment on the Bleed Prevention Screen.
% Proceed to step 6 if a sample copy is desired to check the adjustment result.
% Proceed to step 7 to complete the adjustment.
Original
Output (using Bleed Prevention)