4 detailed setting in stamp, Making fine adjustment on printing position, Setting start number in set numbering – Konica Minolta bizhub PRESS C8000e User Manual
Page 163: Detailed setting in stamp -29
bizhub PRESS C8000
5-29
5.8
Printing Additional Information: Stamp
5
5.8.4
Detailed Setting in Stamp
Making fine adjustment on printing position
Use the Fine Adjustment function to adjust printing position of Numbering, Page No., and Date/Time. The
adjustment range is 0 to 50 mm, in lengthwise direction ([Top] or [Bottom]) and in widthwise direction ([Right]
or [Left]).
1
Select the desired direction key, then use [
+], [,], or touch panel keypad to enter the desired amount.
2
Press [OK] to complete the setting and return to the previous screen.
Setting start number in Set Numbering
Pressing [Start Number] on the Set Numbering Screen will display the following screen to allow you to specify
the start number.
1
Use [
+], [,], or touch panel keypad to enter the desired start number up to four digits.
2
Press [OK] to complete the setting and return to the previous screen.