Atlantis Land A02-IPCAM5 - Manual (Page 28)

25
3.3.5 IP Notification
When network notify type is set to On, you can send an e-mail notification of the completion of the
network setting.
Notify type：Select type of DHCP, Static IP and PPPoE will notify.
SMTP server name：Type the SMTP server name up to 64 characters, or the IP address of
the SMTP server.
Authentication：Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the authentication
methods from the followings.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is
sent.
Note：
• When you set to On, be sure to select either or both SMTP or/and POP before SMTP.
POP server name：It is necessary when the POP before SMTP is selected in Authentication.
Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the
POP server. This setting is necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.