Atlantis Land A02-IPCAM5 - Manual (Page 46)

43
4.5 Motion Detection
When you click Motion Detection on the Advance mode menu, the Motion Detection
setting menu appears. There are three Motion Detection functions as sensors to set for
different detecting zones. Each one has Threshold and Sensitivity inputs which you can
adjust to specific zone sequentially. Motion Detection function can support to FTP, SMTP
and Alarm output for capturing and sending images or starting alarm output.
Click it On when you use the Motion Detection function and detecting zone appears for
adjusting and moving. The common setting options are displayed below. If you do not wish
to use the Motion Detection function, click it Off and press OK.
Motion Detection 1：Click it on for using Motion Detection 1 function as a sensor. You
can adjust and move the detecting zone by using mouse.
Motion Detection 2：Click it on for using Motion Detection 2 function as a sensor. You
can adjust and move the detecting zone by using mouse.
Motion Detection 3：Click it on for using Motion Detection 3 function as a sensor. You
can adjust and move the detecting zone by using mouse.
Threshold：You can use the tool bar to set up-limit value. When detecting zone signals are