Atlantis Land A02-IPCAM5 - Manual (Page 44)

41
4.3.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or
by the built-in motion detection function.
Alarm sending：Select On to set to send mail with connection to the alarm detection.
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set
the motion detection function page.
Note：
• Motion Detection works only when the Video mode is set to MPEG4 and the
Cropping is set to Off.
Alarm Buffer：Select Use alarm buffer when you forward the image/ audio of before and
after the alarm detection (pre-alarm, post-alarm). If you do not select it, only the image of the
moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer
setting menu. For details, see “Setting the Alarm Buffer — Alarm buffer setting Menu on page.
Effective period：Set the period when the periodical sending is effective.
Always：The periodical sending is always effective.
Schedule：You can specify the period when the periodical sending is effective in the
schedule setting in the other section. Click Schedule and the setting menu for the
effective period is displayed.