Atlantis Land A02-IPCAM5 - Manual (Page 38)

35
4.2 SMTP
Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP)
function, you can send a mail with attached image which has been shot linked with the
external sensor input or with the built-in motion detection function. The image file can also be
sent periodically. E-Mail (SMTP) setting menu is composed of three tabs, General, Alarm
sending and Periodical sending.
4.2.1 General
Select On when you use the SMTP function. The common setting options are displayed
below. If you do not wish to use the e-Mail (SMTP) function, select Off and click OK.
Note：
• During transmission of an image file via mail, the frame rate and operation performance
of the monitor image of the main viewer decline.
• While the camera video mode is set to MPEG4, the image of the composite video signal
output from the video output connector of the camera may be distorted during mail
transmission.
• You cannot send an audio file by using the mail sending function.
SMTP server name：Type the SMTP server name up to 64 characters, or the IP address of
the SMTP server.
Authentication：Select the authentication required when you send an email.