Atlantis Land A02-IPCAM5 - Manual (Page 47)

44
over setting value, it would carry on assigned work.
Sensitivity：You can use the tool bar to set down-limit value. When detecting zone signals
are over setting value, it would carry on assigned work.
Carry out the following steps：
1. Click On to Motion Detection 1 choose one of eight orders.
2. A detecting zone 1 appears and use mouse to adjust and move the zone boundaries
and position.
3. Use tool bar to set Threshold and Sensitivity value.
4. Follow the steps to set the other Motion Detection.
5. Click the OK to save the setting.
Note：
• Be careful! Motion Detection function don’t work with Patrol function at same time.