Atlantis Land A02-IPCAM5 - Manual (Page 39)

36
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the authentication
methods from the followings.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is
sent.
Note：
• When you set to On, be sure to select either or both SMTP or/and POP before SMTP.
POP server name ： It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type
the IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
User name, Password：Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
Recipient e-mail address：Type the recipient e-Mail address up to 64 characters. You
can specify up to three recipient E-mail addresses.
Administrator e-mail address ： Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
Attached File Type: Select to attach the file as JPEG or MPEG4.
Subject：Type the subject/title of the e-Mail up to 64 characters. With respect to mail
which is sent according to the alarm detection when Alarm sending of the alarm tab is
set to On, the characters standing for the sensor type added to the subject.
Message：Type the text of the E-mail up to 384 characters. (A line break is equivalent to
2 characters.)