Konica Minolta KIP 7100 - Manual (Page 156)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 155 -
The first method for setting the Aera of interest is to touch
the screen and hold and then drag a box around the
specific area.
This will highlight ony the selected area and if Ok is selected
at this point, will only scan this area.
Clicking Reset AOI will return to the full screen view of the
file.
The second method for setting the Aera of interest is to
touch the screen and hold for a second or two. A menu will
appear, from this window a specific paper size can be
selected as the Area of interest.
This will highlight the specific size selected, and if Ok is
clicked at this point, only this area will be scanned
Note: In both methods once the size is selected the user has
the ability to drag the box around on the screen to set the
position.