Konica Minolta KIP 7100 - Manual (Page 79)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 78 -
Create a Mailbox with Naming Convention
1. Click the SCAN button to begin the scanning process
2. Click the plus sign to add a mailbox to the KIP
3. Select either a Local or SMB mailbox destination
4. For a Local mailbox, type in the name of the local mailbox
5. For an SMB mailbox, type in the information for SMB mailbox configuration. For further
information, please see the KIP user guide
6. Designate a mailbox name mask and a number sequence interval by typing in the following
parameters. Type in the name of the file with the pound symbol (#) where the pound symbol will
insert the numbering interval as defined in the Starting Number section.
a. For each (#) a number will be placed into the file name. In the example above, the first file
name would be Temp00001.ext, the next file name would be Temp00002.ext, etc.
b. It is possible to place the (#) between sets of text. For instance, if the file is to be named
Image1001-2006.ext and the increment is to be from 1001, then the user would input
Image####-2006
in the Naming Convention section.