Konica Minolta KIP 7100 - Manual (Page 74)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 73 -
(Domain server or workgroup workstation)
Share Path Shared resource on destination workstation/server
Username Login credentials on destination workstation/server
Password Password for supplied username on destination workstation/server
Test SMB Maps a network drive to the destination workstation/server
Within the SCAN screen, press the Mailbox button to create an SMB connection.
a. Touch the SMB button to display the SMB Mailbox creation dialog.
b. Press the Mailbox Name button to enter a descriptive name for the SMB scan to file location.
This description will be displayed on the SCAN screen with the label of SMB:[Mailbox Name].
c. Touch Destination Server/Workstation button to enter the NetBIOS name or IP address of the
destination server or workstation that the KIP will connect to in order to allow for scan to file.
a. This must be a server or workstation that the KIP has access to via TCP/IP.
b. Please ensure that the KIP 5000 KIP has been networked properly and is “pingable”
from the destination server/workstation.
d. Touch Domain button to enter the client authorization information. This entry will work in
conjunction with the Username/Password entries as defined in later steps.
a. Some facilities will have user credentials stored on a central authorization server
(Domain Controller/Active Directory Server) that will grant connection access to the
KIP for shared resources. If the KIP is connecting to a workstation (WS01) that is a part
of the Acme.com domain, then the user would enter Acme in the Domain section.
The KIP would get authorization credentials from the SVR01 server in order to scan to
the “Scans” folder on the WS01 workstation (TBurr’s PC).