Konica Minolta KIP 7100 - Manual (Page 34)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 33 -
Stamp
Select “Stamp” to display another sub screen. This
will allow the selection of a “Stamp” or “Water Mark”
to be placed on the scanned image. It will be
imbedded into the image.
a. Use the Arrow buttons to scroll through the
available stamps and select the desired
stamp from the list.
b. The Stamp button will now display the
Advanced Options section.
c. Select OK.
NOTE
The list of “Stamps” is loaded into Copy Mode by the system administrator or key operator.
They cannot be altered or modified in any manner on the KIP printer’s UI.
Please contact these persons for any additional stamps that may be required.
Please see “KIP Request” for these functions.
NOTE
The list of “Folds” is loaded into Copy Mode by the system administrator or key operator. They
cannot be altered or modified in any manner on the UI.
Please contact these persons for any additional stamps that may be required.
Please see “KIP Request” for these functions. An optional KIP Folder must be purchased to
enable these functions.