Konica Minolta KIP 7100 - Manual (Page 179)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 178 -
“?” Screen
Configuration Screen
Overview
The KIP software has the ability to display information about the system and allow detailed configuration
or setting of the KIP 3000 for Copy and Scan modes.
It also has visual user guides which can assist the user in perform the functions of the KIP 3000.
To Enter the “Help – Configuration” screen press on the “?” on the bottom right of the KIP 3000 user
interface.
Some of the configurable settings include:
• Language
• Sleep Timers
• Energy Star - Mode
• Reset Timer for Memory and Default Settings
• Printer Density
• Master Lead / Trail Edge
• Default Mode
• Units (Metric or Inch)
• Default Original Size Mode
• Quality / Scan Speed
• Number of Rolls
• Shading
• Test patterns
• Enable Options
• Network IP settings
Some of the above settings will require access by the system administrator, key operator or a certified
service technician.