Konica Minolta KIP 7100 - Manual (Page 84)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 83 -
Step 4
Enter the correct information in
all fields. To set up the E-mail
functionality. you have to fill in
two sections:
1) The TO: address (in red)
2) The SMTP settings (in green)
Note:
It is recommended that the KIP printer have its own SMTP login.
Since a user will most likely never need to change the SMTP information, this information is considered
‘global’. Once it is entered, it will be used for all email boxes. Once it is changed, it will be changed for
all email boxes.
Step 5
The E-mail can be sent in a zipped or unzipped format.
Step 6
Once all of the information has been entered select the OK button to save these
settings. The new e-mail mailbox will appear in the mailbox list with all other
mailboxes.