Konica Minolta KIP 7100 - Manual (Page 109)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 108 -
Page Size Zoom
To enter a zoom percentage based on pages sizes into the UI:
a. Press on the Percentage value displayed (the number is a
button). This will show a keypad to enter the value.
b. Select Standard button.
c. Select the original page size by pressing onto the original page
size button.
d. Please note either Engineering or Architectural mode can be
utilized by pressing on the button below the original page size.
e. Select the desired Copy page size. Again please note either
Engineering or Architectural mode can be utilized.
f. Press Enter to confirm your selections or Cancel to restart.