Start, View last, Recall job – Konica Minolta KIP 7100 User Manual
Page 110: Stop / reset, Kip touchscreen software, Clear
KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. 2012 KIP. vii_iv
- 109 -
Clear
To reset the percentage value to default, press the “erase” button.
Start
The copier is always set to “Auto Start”. That is when an original is inserted into the
KIP 3000, it will start without user intervention.
The start button is used when a job is recalled. The start button will “start” the job if
depressed after ‘Recall” (the name will change to “Re-print”).
View Last
The last documented scanned to be copied be viewed.
Recall Job
No function in Color Copy Mode.
Stop / Reset
This button has two functions.
1. Press the Stop button to stop the current scan. The original will be ejected
automatically. If not, open Top Cover to remove the original.
2. Press the Reset button to restore the “default settings” in Copy Mode. Some
of the default settings are determined in the Information / Help Screen of the