Konica Minolta KIP 7100 - Manual (Page 115)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 114 -
Simple Scanning
To scan to file in color, please follow these basic steps. The following chapters have details on
adjustments and parameters that the user can change to modify color scans.
Select Scan Mode
From thehome screen select “Scan to file” then select Color Mode in the upper left corner.
Select Size Mode
Select whether the document is an engineering or architectural size document. This will allow the
automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5
inches
Architecture widths = 36, 30, 24, 18, 12, and 9
inches