Konica Minolta KIP 7100 - Manual (Page 162)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 161 -
General Tab
• Select the number of copies to be made along with setting any other options such as:
o
Original Size – Set by Actual Image (this is not changeable)
o
Output Size – Select from available sizes or enter manually
o
Printer – Select from drop down of available printers
o
Media – Select from drop down of calibrated medias
o
Brightness – Adjust brightness as necessary
Note: All of these options are detailed in previous sections.
Color Tab
• Selecting the Color Tab will offer more color
options such as:
• Use Color management On (selected) – will
use the selected ICC profile for either RGB or
CMYK
• Use Color Management Off (unselected)-
uses the colors embedded in the file.
• Rendering intent –choose from four different
rendering intents: absolute colorimetric, relative
colorimetric, perceptual, and saturation