Konica Minolta KIP 7100 - Manual (Page 165)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 164 -
Paneling Tab
Paneling will allow the user to create output that
would be too big for the printer to print under normal
conditions. For example if the desired output is to be
108”x72” wide this can be achieved by using paneling.
In this example we have a 36”x24” original that will
be paneled to 108”x72”. The paneling tab will look
like this. The user can set the count given to specific
values or let the software calculate the necessary
panels. The height can also be controlled to make
handling of the panels easier.
Print Queue Tab
The print Queue will show the progress of the file being
sent to the color printer. Once it has left the print queue it
is at the printer to be printed.