Konica Minolta KIP 7100 - Manual (Page 181)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 180 -
Main Screen - Details
Information Region
This area of the Screen includes meter counts and
software versions
Meter A
Displays the total number of units run on the printer. This counter should match the hard counter on the
right mid- front section on the printer. This unit is in square feet in North America and in Square Meters in
all other countries (when printer set to metric mode).
English mode: 1 count = one square foot
Metric Mode: 1 count = one square meter
9 Service Password protected area for KIP authorized technician use.
10 Hide/Show Version Hides or displays the software and hardware versions on the screen