Konica Minolta KIP 7100 - Manual (Page 184)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 183 -
Machine Serial Number
Displays the KIP hardware serial number, this is also located on the lower rear of the printer.
Supplier / Technical Support – Touchscreen Branding
This region displays the contact information
for KIP 3000 supplies and service. This region
should display your local Authorized KIP
dealers’ information, along with the ability to
link directly to a preset up website. Pressing
the button next to Website will display the Dealer’s configured website. This website can be custom
tailored for the KIP by the Dealer and display information relevant to KIP printing systems.
Loading a dealer logo on the KIP
1. Rename your logo to dealerlogo.jpg
2. Open KIP Request
3. Select Manage
4. Select Push file to IPS
Browse for the file you just renamed to dealerlogo.jpg
5. And select Save.
6. It will say complete.
7. Now go to the
KIP
and go to service mode (enter password for Service
Mode)
8. Go to page two and you should see your logo there
NOTE
If this serial number differs from the “hard coded” number on the lower rear of the printer contact
your local service company! The hard code serial will be taken as correct in the case of any
discrepancies.