Konica Minolta KIP 7100 - Manual (Page 192)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 191 -
Transfer Support
There may be the case that the print image looks so light (not so clear) although
the density setting is proper or higher than required. This kind of problem may
occur when special media is used, because it is difficult to transfer the toner
image fully onto it.
Note: If available on your KIP Printer Model. If unsure please contact technician.
Low Room Temperature
Low Temperature Mode can be validated to secure the fusing quality in the cold
environment.
The toner image may not be fixed firmly onto the paper if you make a copy or
plot right after turning on the machine (in the morning especially) in very cold
environment. But it is possible to avoid this kind of fusing problem by the Low
Temperature Mode.
Note: If available on your KIP Printer Model. If unsure please contact technician.
High Print Coverage
High Coverage Setting Mode will be effective if the image density looks lighter
when you print constant prints with high coverage.
Note: If available on your KIP Printer Model. If unsure please contact technician.
Toner Supply
Used with the 700M and 7100 printer only. When turned on this will level the toner
in the hopper. This can take up to 10 minutes.
Note: If available on your KIP Printer Model. If unsure please contact technician.