Konica Minolta KIP 7100 - Manual (Page 198)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 197 -
Configuration 2
Configuration 2, Page 1
Reset Timer
KIP 3000 systems can be configured to revert to the Log-In screen after a
predetermined period of inactivity. From this screen, users must enter a
username and password before use (if required by system administrator).
English or Metric Units
Set the system from “English Mode” to “Metric Mode” by pressing the English or
Metric button. This will affect the entire KIP 3000 System, including Scan, Print
and Copy. Please note that the printer must be set to the correct size mode for
proper print function.