Konica Minolta KIP 7100 - Manual (Page 199)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 198 -
Default Mode
Sets which screen will be the default, Scan, Copy or Job Info Mode dependent
of the installation environment requirement.
Fold
Sets the system to accept fold parameter loaded by KIP Print and enables the pull
downs on the screens. Please contact your local certified service technician for
configuration of this feature.
Cut Sheet
Enables / Disables the cut sheet function, which may not be required in certain
installation.
Interrupt
Allows the Interrupt button to function in Copy Mode
a. Enabled = allows the user to pause all network print jobs to allow copies
to be printed first
b. Disabled = all copy jobs will be placed in the queue as the order they are received within
c. any network print jobs.