Konica Minolta KIP 7100 - Manual (Page 204)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 203 -
Network
When setting up the KIP Printer on the Network at the site the KIP comes already pre-configured for
DHCP (Dynamic Host Configuration Protocol) and if plugged into the network will automaticaly receive
an IP Address from the DHCP Server.
If the Site is not using a DHCP server to dish out IP address it will be necessary to assign a Static IP
Address to the KIP Printer. The onsite network administrator will need to supply all of the valid information
for the IP Address scheme that will be applied to the KIP Printer.
Default Example Static IP Example
NOTE
Incorrect settings will prevent your system from functioning. Do not enter or modify without your Network Administrators
permission. Access to modify may be locked and may only be granted by a certified service technician.